Gas Analyzer and Opacimeter RY-4000AGH
The TOGas analyzer RY-4000AG is a device for the detection of ignition and injection problems, as well as for the improvement of fuel consumption. Based on infrared technology measures up to 5 gases; CO, CO2, HC, O2, NOx (optional), and other parameters such as Lambda, corrected CO, oil temperature and rpm.
The Opacimeter RY-4000AH is a partial flow meter based on the principle of light absorption by smoke. It allows an official opacity test to be carried out, guided step-by-step by the programme.
In short, our RY-4000-AGH unites the technology of our RY-4000AG and RY-4000AH equipment in a single solution
Standard equipment
- Gas analyser module
- Smoke analyzer module (opacimeter)
- Sampling probe
- Special cabinet for emissions equipment
- Electronic control and SMRW Software
- Commissioning certificate for opacimeter module F
- Temperature and RPM measuring sensors
Technical data
Gas analyser
- Measurable gasesHC, CO, CO₂, O₂, NOx (optional)
- Calculation of Lambda factor and corrected CO
- Storage temperature-50 to 70 ºC
- Operating temperature-12 to 48ºC
- Automatic water and particle removal
- Operating pressure750-1,100 mbar
- Power supply115-230 V 50/60 Hz
- Nominal flow rate4,2 l/min
- Minimum flow rate3 l/min
- CommunicationRS 232 series
Opacimeter
- Environmental working conditions: TemperatureAmb. temp. in use: -10 to 55ºC / Amb. temp. in official use: 0 to 45ºC
- Environmental working conditions: Humidity30-90%
- Environmental working conditions: Pollution<2%
- Storage temperature-32 to 55ºC
- OpticsGreen light source between 480 and 680 mm, max. 565 mm
- DetectorSilicon photodiode
- Response timeFrom 10 to 90%, <0,2 s
- Acoustic noise53 dB
- Warm-up period3-6 min, depending on outside temperature
- Standard test probe745 mm / 10 mm
- Opacity (range, resolution)N: 0-100% / 0,10% K: 0,00-9,99 m-1 / 0,01 m-1
- Power supply230 V 50 Hz
-
Regulations it complies with
ISO 11614, EMC Standard UNE 82503, NFR 10025-2016
- Measurement of the opacity at % and the absorption coefficient "k", calculated according to Beer-Lambert's Law
-
Dimensions
500 x 250 x 450 mm.
Gas Analyser and Opacimeter Software
Ryme Worldwide has SMRW (Software Maquinaria Ryme Worldwide) for its equipment, which is responsible for collecting information from our equipment and peripherals, analysing it and displaying it on the information output device. All of this is accompanied by the necessary electronics to optimise performance to the maximum.
Work in your inspection centre or workshop in the fastest and most efficient way with the operation of our Ryme Worldwide Machinery Software.
A unique way of working designed to make the inspector's job easier.
No redundancies, what you need, when you need it, how you need it. Read more
Get to know all our software and management systems
